The Fan Filter Module manufactured by Clean Air Solutions Ltd provides a unique sterile H.E.P.A. filtered clean air system, which provides Class 5 ISO 14644-1 (1999) and Grade A/B EU GMP air quality to the work zone environment.
The Fan Filter Module has a number of key features:
- Manufactured in 304 or 316 stainless steel
- H.E.P.A. filtration to ULPA standard 99.999%s
- Laminar/Uni-directional airflow @ 0.45 m/s
- H.E.P.A. filter changed from below
- Fully installation leak testable to ISO 14644-3 (2004) and PD 6609 (2000)
- Gasket filter or Gel Seal filter
- Optional air diffusers, CG screen, perforated or 4-way diffuser
- Automatic speed control or manually adjusted
- Magnehelic gauge to show filter pressure or velocity
- Easy to install
- Supplied ready for use
- C.A.S. installation and commissioning costed separately
| 600mm x 600 mm Module | 1200 mm x 600 mm Module | |
| Code | 667 | 167 |
| Filter Size | 550 x 550 x 68 mm | 1150 X 550 X 68 mm |
| Width | 590 mm | 1190 mm |
| Depth | 590 mm | 590 mm |
| Height | 700 mm | 700 mm |
| Controls Integral | Variable speed | Variable speed |
| Power | 240 volt 13 amp | 240 volt 13 amp |
| Fan Unit | Integral motor | Integral motor x 2 |
| Pre-Filter | G4 500 x 500 mm | G4 500 x 500 mm |
| Controls | ON/OFF Power | ON/OFF Power |
Key Features
- Fan unit can be remote mounted and duct fed to filter unit for greater flexibility of use
- System is re-circulatory
- Controls can be remote mounted
- Vertical or horizontal mounting
- Easy change H.E.P.A. filter from clean side
- If mounted in Clean Room, no fabric integrity. Clean Room breach when changing filters
- Fan/failure audible alarm available (cost option)